Danfoss Heating
11
F
D
ES
DK
NL
I
GR
PL
LT
CZ
HR
GB
2.3 User Overrides
To temporarily increase or decrease the
programmed temperature.
– press or to select the desired
temperature.
Extend Event 1 (i.e. 06.30 20°C) to last all
day (so that heating remains on at a
constant temperature all day).
– press button once as shown.
To extend the current set temperature by 1,
2 or 3 hours.
– press button once for 1 extra hour,
twice for 2 extra hours, 3 times for 3
extra hours, and press 4 times to remove
override.
To alter main LCD display to show either
time or actual room temperature.
– press NEXT & COPY together.
Batteries will last in excess of two years.
Low battery indicator will fl ash on the LCD
display. The user has 15 days in which to
replace the batteries with high quality
alkaline cells.
2.4 Changing Batteries (not TP7000M)
2
Sometimes you may need to change the way you use your heating
temporarily, i.e. due to unusually cold or warm weather. The TP7000 has
several user overrides, which can be selected without aff ecting the set
programmes.
To Previous Page
Loading...
Need help?
General
