Danfoss VLT 2020 User Manual

MG.20.B6.02 – VLT is a registered Danfoss trademark
VLT
®
2000 Series
12
Following this installation guide the VLT
®
2000 units
with built-in compact RFI filter comply with the EMC
requirements according to EN 55011 group 1A.
Technical data
The technical data on this page only apply to VLT
®
2010, 0.37 kW, VLT
®
2015, 0.55 kW and VLT
®
2020,0.75 kW.with built in compact RFI filter.
■■
■■
■
Cable type: Screened
Max. length: 20 m
Mains supply: 1 x 220-240 V
Installation guide
Clamp to secure cables and cable screen type
195H6129 is delivered with the above units.
Mains supply connection:Mains supply connection:
Mains supply connection:Mains supply connection:
Mains supply connection:
Cable is secured in cable relief fitting.
Earth wire is secured in the earth screw on the
frequency converter.
Motor cable connection:Motor cable connection:
Motor cable connection:Motor cable connection:
Motor cable connection:
Motor cable and screen is secured in cable relief fitting
and the wires are connected in the motor plug.
■■
■■
■
Installation

Danfoss VLT 2020 Specifications

General

Brand	Danfoss
Model	VLT 2020
Category	Inverter
Language	English