Danfoss VLT 2800 Series User Manual

PNU # Parameterdescription Factory setting 4-setup Conv.
index
Data
type
600 Operating hours No 73 7
601 Hours run No 73 7
602 kWh counter No 2 7
603 Number of cut ins No 0 6
604 Number of overtemperatures No 0 6
605 Number of overvoltages No 0 6
615 Fault log: Error code No 0 5
616 Fault log: Time No 0 7
617 Fault log: Value No 0 3
618 Reset of kWh counter No reset No 0 7
619 Reset of running hours counter No reset No 0 5
620 Operation mode Normal operation No 0 5
621 Nameplate: Unit type No 0 9
624 Nameplate: Software version No 0 9
625 Nameplate: LCP identification no. No 0 9
626 Nameplate: Database identification no. No -2 9
627 Nameplate: Power parts version No 0 9
628
Nameplate: Application option type
No 0 9
630 Nameplate: Communication option type No 0 9
632 Nameplate: BMC software identification No 0 9
634 Nameplate: Unit identification for communication No 0 9
635 Nameplate: Software parts no. No 0 9
640
Software version
No -2 6
641 BMC software identification No -2 6
642 Power card identification No -2 6
678 Configure control card
700- Used for wobble function, please see MI28J2xx
4-Setup:
'Yes' means that the parameter can be programmed
individually in each of the four Setups, i.e. one single
parameter can have four different data values. No'
means that the data value will be the same in all Set-
ups.
Conversion index:
This number refers to a conversion figure to be used
when writing or reading via serial communication with
a frequency converter.
See Data character in Serial communication in the VLT
2800 Design Guide.
Data type:
Data type shows the type and length of the telegram.
Data type Description
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Text string
VLT
®
2800 Series
MG.27.A2.02 - VLT
®
is a registered Danfoss trademark 99
All about VLT 2800

Danfoss VLT 2800 Series Specifications

General

Brand	Danfoss
Model	VLT 2800 Series
Category	DC Drives
Language	English