Danfoss VLT AutomationDrive FC 302 Operating Instructions

NOTICE
Where RFI filters are available, there are 2 different type of RFI filters depending on the input plate combination and
the RFI filters interchangeable. Field installable kits in certain cases are the same for all voltages.
380-480 V
380-500 V
Fuses Disconnect Fuses RFI RFI Fuses RFI Disconnect
Fuses
D1 All D1 power sizes 176F8442 176F8450 176F8444 176F8448 176F8446
D2 All D2 power sizes 176F8443 176F8441 176F8445 176F8449 176F8447
E1 FC 102/ FC 202: 315 kW
FC 302: 250 kW
176F0253 176F0255 176F0257 176F0258 176F0260
FC 102/ FC 202: 355 -
450 kW
FC 302: 315 - 400 kW
176F0254 176F0256 176F0257 176F0259 176F0262
Table 3.11 Fuses
525 - 690 V Fuses Disconnect Fuses RFI RFI Fuses RFI Disconnect
Fuses
D1 FC 102/ FC 202: 45-90
kW
FC 302: 37-75 kW
175L8829 175L8828 175L8777 NA NA
FC 102/ FC 202:
110-160 kW
FC 302: 90-132 kW
175L8442 175L8445 175L8777 NA NA
D2 All D2power sizes 175L8827 175L8826 175L8825 NA NA
E1 FC 102/ FC 202:
450-500 kW
FC 302: 355-400 kW
176F0253 176F0255 NA NA NA
FC 102/ FC 202:
560-630 kW
FC 302: 500-560 kW
176F0254 176F0258 NA NA NA
Table 3.12
NOTICE
For further information, see the Instruction Installation of
Field Installable Kits for VLT Drives
3.3.12 Installation of D or E Loadshare
Option
The loadshare option can be installed on frame sizes D1,
D2, D3, D4, E1 and E2.
NOTICE
See the Loadshare Terminal Kit Instructions, 175R5637 (D
frames) or 177R1114 (E frames), for further information.
Ordering information
Frame size D1/D3: 176F8456
Frame size D2/D4: 176F8455
Frame size E1/E2: 176F1843
3.4 F Enclosure Panel Options
3.4.1 Enclsoure Type F Options
Space Heaters and Thermostat
Mounted on the cabinet interior of enclosure type F
frequency converters, space heaters controlled via
automatic thermostat help control humidity inside the
enclosure, extending the lifetime of frequency converter
components in damp environments. The thermostat
default settings turn on the heaters at 10 °C (50 °F) and
turn them off at 15.6 °C (60 °F).
Cabinet Light with Power Outlet
A light mounted on the cabinet interior of enclosure type
F frequency converters increase visibility during servicing
and maintenance. The housing the light includes a power
outlet for temporarily powering tools or other devices,
available in two voltages:
•
230 V, 50 Hz, 2.5 A, CE/ENEC
•
120 V, 60 Hz, 5 A, UL/cUL
How to Install
VLT
®
Automation Drive FC 300 Operating Instructions
MG33U402 - Rev. 2013-12-16 41
3 3

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English