Parameter Option Default Function
Parameter 0-06 GridType [100] 200–240 V/60 Hz/IT-grid
[101] 200–240 V/60 Hz/Delta
[102] 200–240 V/60 Hz
[110] 380–440 V/60 Hz/IT-grid
[111] 380–440 V/60 Hz/Delta
[112] 380–440 V/60 Hz
[120] 440–480 V/60 Hz/IT-grid
[121] 440–480 V/60 Hz/Delta
[122] 440–480 V/60 Hz
[130] 525–600 V/60 Hz/IT-grid
[131] 525–600 V/60 Hz/Delta
[132] 525–600 V/60 Hz
Size related Select the operating mode for restart after
reconnection of the drive to mains volt-
age after a power-down.
Parameter 0-60 Main Menu Pass-
word
0–999 0 Define the password for access to the LCP.
Parameter 1-13 Compressor Se-
lection
[24] VZH028-R410A
[25] VZH035-R410A
[26] VZH044-R410A
[27] VLZ028
[28] VLZ035
[29] VLZ044
[30] VZH088
[31] VZH117
[32] VZH170
Size related Select which compressor to use.
Parameter 3-03 Maximum Refer-
ence
0–200 Hz 200 Hz The maximum reference is the highest ob-
tainable by summing all references.
Parameter 3-15 Reference 1
Source
[0] No function
[1] Analog in 53
[2] Analog in 54
[7] Pulse input 29
[11] Local bus reference
[1] Analog in
53
Select the input to be used for the refer-
ence signal.
Programming
Operating Guide | VLT® Compressor Drive CDS 803
AQ321748767627en-000101 / 130R0570| 27
Danfoss A/S © 2019.12
To Next Page
Loading...
Need help?
General