VLT
®
FCD Series
All about FCD
300
■ Factory settings
PNU
#
Parameter
description
Factory setting Changes during
operation
4-setup Conv.
index
Data
type
500 Address 1 Yes No 0 5
501 Baudrate 9600 Baud Yes No 0 5
502 Coasting stop Logic or Yes Yes 0 5
503 Quick stop Logic or Yes Yes 0 5
504 DC brake Logic or Yes Yes 0 5
505 Start Logic or Yes Yes 0 5
506 Reversing Logic or Yes Yes 0 5
507 Selection of Setup Logic or Yes Yes 0 5
508 Selection of preset ref. Logic or Yes Yes 0 5
509 Bus jog 1 10.0 Hz Yes Yes -1 6
510 Bus jog 2 10.0 Hz Yes Yes -1 6
512 Telegram profile FC protocol No Yes 0 5
513 Bus time interval 1 sec. Yes Yes 0 5
514 Bus time interval function Off Yes Yes 0 5
515 Data readout: Reference % No No -1 3
516 Data readout: Reference [unit] No No -3 4
517 Data readout: Feedback [unit] No No -3 4
518 Data readout: Frequency No No -1 3
519 Data readout: Frequency x scaling No No -1 3
520 Data readout: Motor current No No -2 7
521 Data readout: Torque No No -1 3
522 Data readout: Power [kW] No No 1 7
523 Data readout: Power [HP] No No -2 7
524 Data readout: Motor voltage [V] No No -1 6
525 Data readout: DC Link voltage No No 0 6
526 Data readout: Motor thermal load No No 0 5
527 Data readout: Inverter thermal load No No 0 5
528 Data readout: Digital input No No 0 5
529 Data readout: Analogue input, term. 53 No No -1 5
531 Data readout: Analogue input, term. 60 No No -4 5
532 Data readout: Pulse input, term. 33 No No -1 7
533 Data readout: External reference No No -1 6
534 Data readout: Status word No No 0 6
537 Data readout: Inverter temperature No No 0 5
538 Data readout: Alarm word No No 0 7
539 Data readout: Control word No No 0 6
540 Data readout: Warning word No No 0 7
541 Data readout: Extended status word No No 0 7
544 Data readout: Pulse count No No 0 7
545 Data readout: Pulse input, term. 29 No No -1 7
MG.04.B7.02 - VLT is a registered Danfoss trademark
123
To Next Page
Loading...
Need help?
General