Dantherm HCP 10 User Manual

7
088162 – Version 1.3 – 021018
Using the control panel, continued
Filter and error
indications
This button is the alarm reset. If the LED lights up in orange it’s a warning
indicating that the filter needs to be changed. Please see the service guide
section in the Service Manual for the product to learn how to replace the
filters.
Press the button once to mute for a period of time
 Press and hold for 10 seconds to reset the filter timer. This can be done with or
without filter alarm is present
When there is an alarm on the unit the Red alarm LED lights will flash as many times as
the alarm number.

Dantherm HCP 10 Specifications

General

Brand	Dantherm
Model	HCP 10
Category	Remote Control
Language	English