Dantherm HCP 10 User Manual

3
088162 – Version 1.3 – 021018
Remote Control HCP 10 – Installation and User Manual, continued
Parts This shows the parts that are included with the HCP 10 (wallbox is not included):
Procedure Follow these steps to mount the Remote Control:
Step Action
1 Mount the wallbox in the wall, if not already done.
The HCP 10 fits to a GIRA EAN 4010337061038 or single LK Fuga EAN
5703302105002 (green) wallbox/Unterputzdose.
2 Mount the metal frame on the wallbox using the 2 screws.
3 Put the cable from the wall through the plastic frame and click it into the
socket on the Control panel.
4 Switch the power on and check if the display on the HCP 10 lights up, and
Click the Control panel on the metal frame.
Wall box
Metalframe
Plastic frame
Control panel
RJ cable

Dantherm HCP 10 Specifications

General

Brand	Dantherm
Model	HCP 10
Category	Remote Control
Language	English