XPS Card Printer Driver User’s Guide 79
Input Hopper
For printers that have an optional multi-hopper, the Input Hopper setting allows you to select the
hopper to use when you print a card. This setting does not display for single-hopper printers.
You also can use an escape to specify the input hopper to use. Refer to “Input Hopper Selection
Escape” on page 111 for more information.
1. Open the Printing Preferences window.
2. On the Layout tab, click Advanced.
3. Click Input hopper and select the
hopper number. The default is hopper 1.
4. Click OK to save your selection and then
click Apply on the Layout tab.
To Next Page
Loading...
Need help?
General
