Cleaning
Quick Reference Guide 41
Cleaning
Exterior surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure best
performance during scanning operations. Contacts on the
scanner and the base should also be cleaned as needed to
ensure a good connection.
Use a soft, dry cloth to clean the product. If the product is very
soiled, clean it with a soft cloth moistened with a diluted non-
aggressive cleaning solution or diluted ethyl alcohol.
CAUTION
Always be sure to unplug the reader and
base from the wall plug before touching
the contacts.
CAUTION
Do not use abrasive or aggressive cleans-
ing agents or abrasive pads to clean scan
windows, contacts or plastics.
Do not spray or pour liquids directly onto
the unit.
To Next Page
Loading...
Need help?
General
