16
Safety and Troubleshooting
Mirrors
If you are having trouble adjusting the mirrors you may need to adjust them at the base.
Lift the cover as seen in gure A) up and use a wrench to losen the bolt at gure B). Repo-
sition it as needed and then screw back in the mirror and retighten the bolt then put the
cover back over it.
Kill Switch
If you turn the keys in the ignition and you receive 0 power (nothing lights up) either your
battery is completly dead or more likely the kill switch is set to o . Lift up the rear seat (see
Storage section for more info) and you will nd on the left the kill switch. Flip that switch
if it is set to o .
To Next Page
Loading...
Need help?
General
