Definitive Technology Adapt User Manual

3
owner’s manual
www.definitivetech.com
Adapt
W Adapt Back Panel
• DC IN 12V—power cable connects here
• ETHERNET—wired connection to your router
• 3 AUX IN—(Source 3) 1/8” mini jack connection from a
smartphone, tablet or computer
• USB—for firmware updates only
• 2 AUX IN—(Source 2) RCA connection from Blu-ray, cable/satellite
• AUDIO OUT—line level connection to audio/video receiver
• 1 OPT IN—(Source 1) connection from TV
• SPEAKER—Right and Left channel hookups
• Wi-Fi SETUP Button—to connect wirelessly to your Wi-Fi network
Connecting the W Adapt To Your Receiver
There are two ways to connect your W Adapt to your receiver:
1. Digital Out- this is a coaxial or optical connection to the receiver.
(Recommended)
2. Audio Out – make an analog RCA connection to the receiver.
Getting Started
Home Network Basics
In general, Wi-Fi is the wireless streaming of data over a network. Here,
Wi-Fi audio is the streaming of music throughout a home by connecting multiple
speakers and/or devices to a wireless network. The controller for the Denitive
Technology Wireless Collection is the Denitive Technology App, which sends
music information to each DTS Play-Fi enabled speaker or device.
Network and System Requirements
It all begins by building a wireless home network, preferably one with a
high-speed Internet connection. Here’s what you’ll need to connect your
W Adapt to your network:
• A Wireless Network connected to the internet with an 802.11g router
or better.*
• An Android device with version 2.2 operating system or newer OR
an iOS device with version 6.0 operating system or newer.
• The password for your wireless network (if required).
*Router type is usually listed on the router, itself. Please call the dedicated
Denitive Technology Acionado hotline at 1-800-223-5246 for further
questions related to router type.
For The Best Music Streaming Experience
To ensure your system is operating under the best environment possible, here
are a few additional tips:
• For the fastest streaming performance, especially when connecting
to multiple speakers simultaneously, an 802.11N router or better is
recommended.
• Ensure the Play-Fi device is within wireless reach of your router,
or that the signal is not blocked by concrete, brick, or other walls. The
quality of your connection can be observed in the Denitive App by
the Wireless Strength icon.
3
2
3
5
6
42
1
1
4
NetAmp
NetAdapt
What’s in the Box
1. W Adapt
2. RCA cable (3’)
3. Toslink cable (6’)
4. 12V power adapter
5. Setup Guide
6. Optional mounting brackets for custom-installed audio/video racks
(Screws for securing brackets to adapt included.)
SUB OUT

Definitive Technology Adapt Specifications

General

Brand	Definitive Technology
Model	Adapt
Category	Adapter
Language	English