For Front
Effeds
Speakers
The BPXs are ideal for use
as
front effects speakers in DSP installations. They
should
be placed on the front wall with the wire terminals against the wall and the
speakers separated by approximately two-thirds
of
the front wall. Placement above ear
level is recommended
if
possible; however, lower placement
is
possible, if necessary.
Mounting
BPXs
With Supplied
Mounting
Plates
Each set
of
BPXs comes with a pair
of
optional mounting plates which may be
used to hang the speakers on the wall.
To
use these plates, simply fasten the plates
(with the round hole at the bottom
of
the plate) to the rear panel
of
the speaker.
Please note that there is a recess routed under the grill cloth on the top half
of
the
rear
of
the speaker (above the input connecting plate) into which the mounting plate
fits (sandwiching the cloth between the plate and cabinet, when the mounting plate
is pressed into the recess). Simply feel for the recess and press the mounting plate
into it, fastening it into the cabinet with the provided screws. Use a toggle bolt or
other similar anchored fastener in the wall to hold the screw which the mounting
plate will hang on. Do not use an unanchored screw in the wall.
Technical Assistance
It
is our pleasure to offer assistance
if
you have any questions regarding your
BPXs or their setup. Please contact your nearest Definitive Technology dealer or
contact us directly at 410-363-7148.
Service
Service and warranty work on your Defmitive loudspeakers will normally be
performed by your local Definitive Technology dealer.
If,
however, you wish to
return the speaker to us, please contact us fIrst, describing the problem and request-
ing authorization as well as the locations
of
the nearest factory service center.
Please note that the address given in this booklet is the address
of
our
offices only. Under no circumstances should loudspeakers be shipped to
our offices or returned without contacting us first and obtaining return
authorization.
Definitive Technology Offices
11433 Cronridge Drive
Owings Mills, Maryland 21117
Phone: 410-363-7148
Visit
us
at
www.definitivetech.com
To Next Page
Loading...
Need help?
General
