bass output when using full range main speakers, run the main speakers
full range by hooking them up directly to the amp. In many systems,
if
your speakers are true full range systems, you may find that you get a
more satisfying sound by running the speakers full-range and crossing
your subwoofer in fairly low setting (40-70 Hz). On the other hand,
if
you
find that you are overdriving your main speakers, you will clearly be able
to play your system louder by using the built-in high pass crossover for
your main speakers.
AMPLIFIER
OR
RECEIVER
L R
I .,. I - I .,. I - I
I{
,ll{ ,ll(
,)1(
,)1
I I I
o
-
-
--
MAIN
SPEAKERS
RIGHT
LEFT
- + - +
Inl(;)1
*NOTE:
If
you
wish to
run
your
main
speakers
full
range
with
no low frequency
roll-off,
hook
them directly to
the main speaker
output
terminals
or
your
receiver
or
amplifier as in
any normal hi-fi
system.
The Advantages
of
Multiple
Subwoofers
Definitive's ProSub subwoofers are engineered to be used singly or in
pairs. With a single subwoofer, both left and right signals are sent to the
subwoofer where they are combined via the electronic crossover into one
composite signal. With two subwoofers, the left and right low frequency
signals can be reproduced by their own individual subwoofers or the two
subwoofers can just be doubled up on the LFE channel with a Y connector.
The use
of
one subwoofer achieves outstanding performance; however, the
addition
of
a second subwoofer clearly offers the highest level
of
perfor-
II
mance achievable for both movies and music. The use
of
two subwoofers
To Next Page
Loading...
Need help?
General
