8
Battery Charge Indicator
A battery charge indicator is built into the Power LED and is active as soon as the
headphones are turned on. Upon power-up, the LED ashes to display the current battery charge.
Number of Flashes Charge Status
1 20%
2 40%
3 60%
4 80%
5 100%
Passive (Non-Powered) Listening Mode
Symphony 1 can be used passively (turned off or without battery) using the supplied auxiliary cable. This is
especially helpful during periods in which you are looking to conserve battery life or are simply out of battery.
Important note: all volume controls, microphone and telephone functions are disabled when in non-powered
mode.
Hard-wired connections
While most will enjoy the Symphony 1 headphones in Bluetooth
mode, we recognize there are circumstances in which a hard-wired
connection is preferred or required. The Symphony 1 headphones
offer the following hard-wired listening options:
1) Connecting your headphones to a computer using the provided
USB cable allows you to listen to a full digital audio stream that
leverages the superior performance of the Denitive Technology
headphone DAC. It will also charge your phone.
2) Connecting your headphones with the provided AUX cable allows
you to listen to the headphones in either active (powered) or passive
(non-powered) mode. This connection is required when the battery
is depleted.
To Next Page
Loading...
Need help?
General