Dell 1908FP-BLK User Manual

Setting Up the Monitor:Dell 1908FP-BLK Flat Panel Monitor User's Guide
file:///T|/htdocs/monitors/1908WFP/1908FPBL/en/ug/setup.htm[11/8/2012 12:10:33 PM]
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all
cables as shown above.
Attaching the Soundbar(optional)
NOTICE: Do not use with any device other than Dell Soundbar.
1. Working from the rear of the monitor, attach the Dell Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Dell Soundbar to the left until it snaps into place.
3.
Connect the soundbar to the Dell Soundbar power connector (See Bottom View for Details)
4. Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
Removing the Stand
NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.
To remove the stand:

Dell 1908FP-BLK Specifications

General

Brand	Dell
Model	1908FP-BLK
Category	Monitor
Language	English