20" LCD Color Monitor Dell E207WFP
7
3.2 Control Buttons
A
Input select
Use the Input Select button to select between two different video signals
that may be connected to your monitor.
NOTE: The floating 'Dell Self-test Feature Check' dialog appears on
a black background if the monitor cannot sense a video signal. Depending
upon the selected input, one of the dialogs shown below will scroll
continually.
NOTE: If one of the DVI or VGA cable is removed, the display will
automatically switch to the other input source where the cable is still
connected.
B
OSD menu / select
The Menu button is used to open and exit the on-screen display (OSD),
and exit from menus and sub-menus. See Using the OSD Menu.
C
Brightness/Contrast Hot Key
Use this button for direct access to the "Brightness" and "Contrast" control
menu.
C, D
Down (-) and Up (+)
Use these buttons to adjust (decrease/increase ranges) items in the OSD
menu.
NOTE: You can activate automatic scroll feature by pressing and
holding either + or - button.
To Next Page
Loading...
Need help?
General
