EasyManuals Logo
Home>Dell>Switch>Networking N3048P

Dell Networking N3048P User Manual

Dell Networking N3048P
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13 Expansion Modules for Dell Networking Switches
4 Rack Switches and Corresponding Modules
This section identifies each Dell Networking rack-mounted switch that supports expansion modules, lists each
corresponding expansion module, and provides a brief overview of each to help identify the correct module for its
purpose.
A picture of each switch is provided below. Under each switch are pictures of supported modules with descriptions
and Dell part numbers for identification and ordering.
4.1 Dell Networking N3000 Series (N3024, N3024F, N3024P, N3048,
N3048P)
There are five different switch models in the Dell Networking N3000 series, each with one expansion slot located on
the back of the chassis. The following modules are supported:
10BBASE-T module
SFP+ module
Each expansion module has two ports. The modules are hot-swappable, so modules can be installed without
rebooting the switch. The yellow outlines in Figure 7 show the expansion slot for each switch.
Figure 7 Dell Networking N3000 Series Switch (1G Ethernet) and Available Modules
NOTE: The N2000 series switches (N2024, N2024P, N2048, and N2048P) do not support expansion modules.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell Networking N3048P and is the answer not in the manual?

Dell Networking N3048P Specifications

General IconGeneral
BrandDell
ModelNetworking N3048P
CategorySwitch
LanguageEnglish

Related product manuals