Dell SE2219H User Manual

17|
Setting up the monitor
Setting up the monitor
Connecting the stand
NOTE: The stand is not attached when the monitor is shipped from
the factory.
NOTE: The following procedure is applicable for the stand that shipped
with your monitor.
To attach the monitor stand:
1.
2.
Align the stand-riser bracket with the grooves at the back of the monitor.
Connect the stand riser to the stand base, and then tighten the screw on the stand
base.

Dell SE2219H Specifications

General

Color	silver
Screen Type	led
Tiltable	yes
OS Compatibility	windows
Screen Size	21.5 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	8, 000, 000:1
Pixel Pitch	102 pixels per inch
Horizontal Scan Rate	83 kilohertz
VGA Ports	1
Power Saving Mode	0.5 watts
Power Consumption	17 watts
Depth with Stand	6.0 inches
Width with Stand	19.2 inches
Depth without Stand	6 inches
Height without Stand	15.2 inches
Net Weight without Stand	7.0 pounds