69 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0
Join cluster
9.2 Configuring LACP to each node
Once the cluster has been created, and each node has been added to the cluster, the rest of the
configurations can be done through the OneFS web GUI. This section will cover the creation of two subnets
and their associated IP pools, as well as the addition of static routes to ensure end to end connectivity. This
will include ensuring that the LACP option is selected and the appropriate interfaces are selected.
1. Navigate to a web page and use the first IP address in the range defined for the ext-1 interface,
https://100.67.170.140:8080. This will bring you to the first node in the cluster.
OneFS Web GUI
To Next Page
Loading...
Need help?
General