EasyManuals Logo
Home>DeLonghi>Coffee Maker>BAR 4

DeLonghi BAR 4 User Manual

DeLonghi BAR 4
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Please read this instruction booklet
carefully before installing the
appliance and keep it handy for futu-
re consultation. In so doing you will
obtain the best result and maximum
safety in its use.
SAFETY INSTRUCTIONS
- Do not immerse the appliance in water.
- Do not operate the appliance without first
having water in the tank.
- Do not fill the water tank with milk.
- Be careful not to scald yourself with spouts of
water or vapour or by using the appliance
incorrectly and do not touch hot parts (water,
dispensing area in contact with the filter-hol-
der and filter).
- Do not remove the filter-holder while
the appliance is under pressure or
dispensing.
- Once the packaging has been removed,
check that the appliance is in full working
order. If in doubt, do not use the appliance
and contact qualified service staff.
- Packaging materials (plastic bags, foam poly-
styrene , etc.) should not be left within reach
of children as they could be a potential s o u r -
ce of danger.
- This appliance is for domestic use only. Any
other use is to be considered improper and
therefore dangerous.
- Do not touch the appliance when hands or
feet are wet or damp.
- Do not allow children or irresponsible peo-
ple to operate the appliance.
- Installation must be carried out according to
the manufacturer’s instructions.
- The appliances power-cable must not be
replaced by the user as special tools are
required in order to replace it. In the event of
damage to the cable, or if the cable needs
replacing, contact only the nearest after-sales
assistance centre authorised by the manufac-
turer.
- Materials and objects that are to come into
contact with foodstuffs are in accordance
with what set forth by EEC directives
89/109.
INSTALLATION
- Position the appliance on a level surface
away from faucets and wash basins.
- Make sure the power supply corresponds to
that specified on the appliance’s data plate.
Only connect the appliance to a power socket
which has a minimum load of 10A and
which is efficiently earthed.
- In the event of the socket being incompatible
with the plug on the appliance, have the
plug replaced with a suitable one, by quali-
fied professional staff.
- The electrical safety of the appliance is ensu-
red only when the latter is properly and effi-
ciently earthed. If in case of doubt, ask a
qualified professional.
- Do not install the appliance in rooms that
may reach temperatures of or below 0°C (as
freezing may cause damage).
PREPARING EXPRESSO COFFEE
1 Remove the boiler cap by turning it anti-
c l o c k w i s e .
2 Using the carafe supplied (fig. 1) pour water
into the boiler (fig. 2) according to the
amounts shown in the table at the end of the
text. Do not exceed the amounts
shown as this could cause the
appliance to malfunction. While filling
the boiler make sure the ON/OFF switch is in
the OFF position.
3 Carefully close the boiler cap by turning it
clockwise.
4 Insert the filter into the filter-holder. (fig. 3).
5 Put the coffee evenly into the filter according
to the amounts shown in the table following
(fig. 4). It is important to use medium ground
coffee. (Avoid using too finely ground coffee
otherwise the filter could become blocked,
MOKA coffee is suitable).
6 Remove excess coffee from the filter rim (fig.
5).
7 To attach the filter-holder to the machine
place the filter holder under the heater-faucet
(fig. 6) and line up with the arrow marked
5
bar 4/5732101400 9-06-2000 9:41 Pagina 5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeLonghi BAR 4 and is the answer not in the manual?

DeLonghi BAR 4 Specifications

General IconGeneral
BrandDeLonghi
ModelBAR 4
CategoryCoffee Maker
LanguageEnglish

Related product manuals