5
ENGLISH
Control Panel
Humidity Control
The mechanical model unit has a control panel containing a two colors control light and two
controls:
Auto shut-off, Fan speed and Humidity control
Green light
• The green light will illuminates indicating that the dehumidifier is on.
Red light
• The red light illuminates when the water tank is full and needs to be emptied.
• It also illuminate when the water tank is not properly positioned.
Fan speed knob
•This controls the speed of the airflow.
Humidity Control knob
•This controls the humidity level in the room.
Unit operation
1. Turn the Humidity Control knob to OFF. Plug the power supply cord into an electrical outlet.
2. To turn the appliance on, turn the humidity control in the clockwise direction till the green
light will be on. The Humidity Control knob can be set anywhere between OFF and CON-
TINUOUS for normal operation.
If you need more dehumidification, turn the Humidity Control knob toward CONTINUOUS.If
you need less dehumidification, turn the Humidity Control knob toward OFF.
3. If you want to control the speed of air flow, turn the Fan Speed knob toward Low or High.
4. Turn the Humidity Control knob to OFF to stop the unit manually.
Control light
Fan Speed knob
MECHANICAL MODEL
To Next Page
Loading...
Need help?
General
