To enter the DISPLAY test:
Plug the machine ON.
Press and hold: 1 Coffee + Steam buttons
Press On/Off Switch (position I)
Turning the knob,
the display will show
the bar increasing
or decreasing.
DISPLAY TEST PROCEDURE
Pressing each icon the display
will show following message
icon message
Note: Release buttons some seconds
after icons blinked.
DISPLAY TEST PROCEDURE FOR
ECAM23.210 INTENSA
To EXIT the procedure, press On/Off Swicth (position 0) or unplug the machine.
Test procedure ends automatically 1 minute after you complete it.
NOTE: After display Test performing, you need to intialize the machine.