14
Maintenance of air filter
A clogged air filter reduces the quantity of cir-
culating air and the efficiency of the applian-
ce. Clean filter every week using a vacuum
cleaner.
Removal and replacement of air filter
Gently pull filter upwards.
Push down to replace.
Cleaning procedure
To remove dust deposited on filter, use a
vacuum cleaner. If it is very dirty, soak in
lukewarm water and rinse thoroughly. The
temperature of the water must be kept below
104°F. After washing, leave filter to dry before
replacing.
END OF SEASON OPERATIONS
1) Disconnect plug.
2) Remove tank and empty it.
3) Some water may remain in the tank. To
avoid unpleasant odors, pour two spoons
of bleach into the tank.
4) Drain water from collecting tray.
5) Remove exhaust hose.
6) Clean filter and dry well before replacing.
7) Cover appliance with a polyethylene bag
to prevent dust from entering.
You can use the polyethylene bag inclu-
ded in the packaging.
Remove dust with a
vacuum cleaner
Rinse with running
water
fig. 26
fig. 27
fig. 28
fig. 29
fig. 25
The appliance is equipped with an exclusive
eletrostatic filter.
If you want to use the electrostatic filter,
remember to remove the anti-dust filter and
replace it with the eletrostatic.
The special high-efficiency electrostatic filter
can capture very small particles (up to 0.3
microns in size). The filter is active in all of the
functions.
Replace the filter at the end of each season,
or when depleted. The filters are available at
the authorized Dè Longhi service centers or
Dè Longhi sales outlets.
Do not attempt to clean the electrostatic filter, as
this may diminish its filtering capacity.
ELECTROSTATIC FILTER
Air filter cleaning
To Next Page
Loading...
Need help?
General
