Delta-q QOSMO User Manual

InstructIons for use
52
53
EN
First use
Upon first use, or when it has not been used for some time,
the following operations must be carried out:
• Removethewatertankfromtheequipment(2).
Wash the tank carefully in water.
After washing, fill it with drinking water and refit
to the machine in the correct position.
• Checkthatthelever(5)isdown.
Place a cup on the tray (7).
• PresstheGeneralButton(11)toposition“ON”.
The red light (12) will illuminate.
Wait for the green indicator to show (14) and then
 presstheextractionbutton(13)tostarttheow
of water from the extraction nozzle (10).
Press the extraction button again (13) so that the
water stops running.
This operation is required to ensure that the
water heater is primed and the equipment
properly activated.
• Conrmthatthewatertank(2)hastherecommended
water level for coee preparation.
As required fill or top up the tank as indicated in the
paragraph “Filling the water tank” (page 51).
• PresstheGeneralButton(11)tothe“ON”position.
The red light (12) will illuminate indicating that the
heater unit is warming the water.
Water heating is activated automatically.
• Waitforthegreenlight(14)toshowwhichconrms
the correct operating temperature.
Preparing the drink
• Conductapurgeoperationbeforestartingthepreparation
of any beverage.
Without inserting a capsule, press the extraction button (13)
to pump water through the system. Press the extraction
button again (13) to stop the purge operation.
The equipment is ready to start preparing your beverage.
NOTE: Carrying out the Purge operation on a regular basis
guarantees improved drink quality and assists with the
ongoing maintenance of the equipment.
• Presstheopeningleverofthecapsuleholder
housing unit (5) and raise it to its limit.

Delta-q QOSMO Specifications

General

Brand	Delta-q
Model	QOSMO
Category	Coffee Maker
Language	English