Delta 7888 - User Manual

Conforms to
ASTM F1169-10a Full
Size Crib & F1821
Safety Standards
Style #:
Lot:
Date:
___________
___________
___________
A
4 in 1 Crib
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
FACTORYREV
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
To register your product for important safety alerts and updates to your product please
visit www.DeltaChildren.com and click on Product Registration.
When contacting Delta Consumer Care please reference
the above information. Before contacting Delta Consumer
Care please ensure that the information above matches the
information found on the label on the Crib End bottom rail,
please reference the information found on the product
when contacting Delta Consumer Care.
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
December 7, 2012, 23343, R4
©2012 DELTA ENTERPRISE CORP.

Delta 7888 Specifications

General

Brand	Delta
Model	7888
Category	Baby & Toddler Furniture
Language	English

Summary

Product Parts and Hardware

Crib Assembly Instructions

Step 1: Assemble Crib Ends

Attach crib end panels to back posts using bolts and Allen wrench.

Step 2: Attach Back Side and Top Rail

Connect back side panel and top rail using bolts and metal pins.

Step 3: Install Mattress Support

Attach the mattress support using bolts and adjust for height positions.

Step 4: Attach Front Side and Top Rail

Connect front side panel and top rail using metal pins and bolts.

Toddler Bed Conversion

Step 1: Remove Crib Components

Remove the top rail and front side panel from the assembled crib.

Step 2: Attach Stabilizer Bar

Secure the stabilizer bar to the crib frame using metal pins and bolts.

Step 3: Attach Guardrail

Attach the guardrail to the converted frame using bolts.

Toddler Bed Warnings and Usage

Full Size Bed Conversion

Step 1: Disassemble Crib

Step 2: Attach Adapter Plates