Model name
Power
supply
Input Output
Dimension (mm) Outline
Points Type Points Type
DVP08SM11N 8
DC Type
Sink/Source
0
DVP16SM11N 16 0
DVP06SN11R 0
N/A
6
Relay
DVP08SN11R 0 8
DVP08SN11T 0 8
Transistor
(Sink)
DVP16SN11T 0 16
DVP08SN11TS 0 8
Transistor (Source)
DVP16SN11TS 0 16
Specifications
Electrical Specifications
Model
Item
08SM11N
08SM10N
16SM11N
08SN11R/T
/TS
08SP11R/T
/TS
16SP11R/T 16SP11TS 06SN11R
16SN11T
/TS
Power supply voltage 24VDC (-15%~20%) (with DC input polarity reverse protection)
Motion specification Within 5ms of the momentary power loss, the device will keep on operating
Power consumption 1W 2W 1.5W 1.5W 2W 2W 1.5W 1W
Insulation resistance > 5MΩ (all I/O point-to-ground: 500VDC)
Noise immunity
ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV,
Analog & Communication I/O: 1KV
Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
Earth
The diameter of grounding wire shall not be less than that of L, N terminal of the power. When many PLCs
are in use at the same time, please make sure every PLC is properly grounded.
Operation / storage
environment
Operation: 0°C ~ 55°C (temperature), 5% ~ 95% (humidity), pollution degree 2
Storage: -25°C ~ 70°C (temperature), 5% ~ 95%（humidity）
Shock / vibration
immunity
International standards: IEC61131-2, IEC 68-2-6 (TEST Fc) / IEC61131-2 & IEC 68-2-27 (TEST Ea)
Weight (g) 162 / 141 146 154 / 146 141 / 136 162 / 154 151 200 70
I/O Point Specifications
Input Point
Input point type DC AC
Input type DC Type (Sink or Source) -
Input resistance - 19Kohm/50Hz 16Kohm/60Hz
Input current/voltage 24VDC 5mA
85 ~ 132VAC, 50 ~ 60Hz
9.2mA , 110VAC/60Hz
Active level
Off On: more than 16.5VDC More than 79VAC
On Off: less than 8VDC Less than 30VAC
Response time Approx. 10ms
Off On < 15ms
On Off < 20ms
Circuit isolation /
operation instruction
By photocoupler / LED On
To Next Page
Loading...
Need help?
General
