7
1. Grinder
2. 1/4-20x1/4" Hex Head Screw (2)
3. 5/16-18 x 1/2" Hex Head Screw (4)
4. Eye Shield Bolt (2)
5. 5/16-18x3/4" Knob (2)
6. Eye Shield Knob (2)
7. Eye Shield Spacer (2)
8. 5/16" Flat Washer (6)
9. 1/4" Flat Washer (2) (Larger OD)
10. Eye Shield (2)
11. Left Tool Rest
12. Left Tool Rest Arm
13. Left Spark Guard
14. Right Spark Guard
15. Right Tool Rest Arm
16. Right Tool Rest
17. Wrench
18. Wheel Dresser
19. Buffing Wheel
20. Buffing Wheel Spacer
21. 1/4" Flat Washer (2) (Smaller OD)
NOTE: Use a 40 watt or less, 120 volt, reflector-track
type light bulb (not supplied).
1
CARTON CONTENTS
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your
machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
To Next Page
Loading...
Need help?
General
