Deltec E-Flow Series User Manual

Controller panel
1) Remote, red light
The pumps can be equipped with a separate multifunction controller (available
April 2012). This controller enables the pump to be used in a interval or
random mode. Up to four pumps can be controlled with one multifunction
controller. If the multifunction controller is used, the red light comes on.
2) Green light
It indicates that the power is on.
3) Display
a) It shows the set wattage of the pump.
b) It shows the faults of the pump with a code, see fault finding next page.
4) Arrow buttons
Setting the wattage.
-10-

Deltec E-Flow Series Specifications

General

Brand	Deltec
Model	E-Flow Series
Category	Water Pump
Language	English