Denon 685 User Manual

39
13
SURROUND
Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from each speakers. This adjustment can
be performed from the remote control unit, as (described) below.
• The adjustment with the test tones is only effective in the STANDARD (DOLBY/DTS SURROUND) modes.
The adjusted playback levels for the different surround modes are automatically stored in the memory of each surround modes.
1
Set the STANDARD (DOLBY/DTS SURROUND) modes.
2
Press the TEST TONE button.
3
After completing the adjustment, press the TEST TONE button
again.
(Main unit) (Remote control unit)
(Remote control unit)
Test tones are output from the
different speakers. Use the channel
volume adjust buttons to adjust so
that the volume of the test tones is
the same for all the speakers.
(Remote control unit)
1
2
2, 3
2
1
(Remote control unit)
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
ENGLISH

Denon 685 Specifications

General

Brand	Denon
Model	685
Category	Stereo Receiver
Language	English