The First Name
In Digital Audio
3
AVR-1100
Power Amplifier Section Same quality amplifier for all 5-channel
Rated output * THD figures are power amp stage values.
Front 55 W + 55 W
(8 ohms, 20Hz - 20 kHz, THD 0.08%)
Center 55 W
(8 ohms, 20Hz - 20 kHz, THD 0.08%)
Surround 55 W + 55 W
(8 ohms, 20Hz - 20 kHz, THD 0.08%)
Dynamic Power -
-
-
Preamplifier Section
Input sensitivity/ Impedance PHONO (MM) : 2.5 mV/ 47 kohms
CD, DVD/ TV, VCR, DAT/ TAPE,
6-ch EXT. : 200 mV/ 47 kohms
Output level/Load Impedance SUB WOOFER : 1.2 V/ 10 kohms
VCR, DAT/ TAPE :
150 mV/ 47 kohms
Digital Input Optical
Coaxial
RF
Digital Output
RIAA deviation ±1 dB (20 Hz - 20 kHz)
Signal-to-noise ratio (A-weighting) 96 dB
Tone control Treble : ± 10 dB at 10 kHz
Bass : ± 10 dB at 100 Hz
Video Section
Input Terminal Composite DVD/ TV, VCR :
1 Vp-p / 75 ohms
S-Video
Output Terminal Composite VCR, MONITOR :
1 Vp-p / 75 ohms
S-Video
FM Section
Tuning frequency range 87.5 - 107.9 MHz
Usable sensitivity 1.0 µV (11.2 dBf)
S/N 50 dB sensitivity (µV at 75 ohms) Mono : 1.6 µV (15.3 dBf)
Stereo : 23 µV (38.5 dBf)
Signal-to-noise ratio (A-weighting) Mono : 80 dB, Stereo: 75 dB
Total harmonic distortion Mono : 0.15%, Stereo: 0.3%
AM Section
Tuning frequency range 520 - 1710 kHz
Usable sensitivity 18 µV
Signal-to-noise ratio 50 dB
General
Power supply, Power consumption AC 120 V, 60 Hz, 3.0 A
Dimensions, Weight 434 (W) x 142 (H) x 315 (D) mm, 8.0 kg, 17.6 lbs.
17.1” (W) x 5.6” (H) x 12.4” (D)
Specifications
AVR-1100
To Previous Page
Loading...
Need help?
Power Amplifier Section
