Denon AVR-1513 Quick Start Guide

4
ENGLISHFRANÇAISESPAÑOLPORTUGUÊSESPAÑOLNEDERLANDSSVENSKA
Preparation PlaybackConnect Setup
Connect this unit to the television using an HDMI cable
(sold separately)
When a device supporting Deep Color signal transfer is connected, use a cable compatible
“High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.
HDMI IN
1
Turn the television and subwoofer power on, and
switch the video input to this unit (HDMI input)
For details on how to operate the television and subwoofer , see the television and subwoofer
instruction manual.
q Power on
w Power on
e Switch the input to this unit (HDMI input)
2
Insert the main unit power plug into the wall socket
To household power outlet
(AC 120 V, 60 Hz)
Power cord
3
Insert the provided batteries into the remote control unit
q Remove the rear lid in the direction of the
arrow and remove it.
w Load the two batteries properly as indicated by
the marks in the battery compartment.
R03/AAA
e Put the rear cover back on.
4
4
Turn on power to the unit
The power indicator fl ashes green and the power turns on.
POWER
QUICK SELECT
2134
Press POWER X
You can also switch the power to standby by
pressing X on the main unit.
5
Before setting up the speakers
1.AVR1513E3ENGIMGS00A0214校了後修正.indd41.AVR1513E3ENGIMGS00A0214校了後修正.indd4 2012/02/1420:03:302012/02/1420:03:30

Denon AVR-1513 Specifications

General

Receiver type	-
Audio output channels	5.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	75 W
HDMI in	4
Composite video in	2
Digital audio optical in	1
Connectivity technology	Wired
Ethernet LAN	No
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Radio Data System (RDS)	Yes
Preset stations quantity	56
Supported video modes	1080p, 720p
Analog signal format system	NTSC, PAL
Display	LCD
Product color	Black
Audio decoders	Dolby Pro Logic II, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-HD
Apple docking compatibility	Not supported
Graphical user interface (GUI) language	English
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7800 g