25
ENGLISH
12
OPERATION
Before operating
Preparations:
Check that all connections are proper.
1
Turn on the power.
Press ON/STANDBY on the main unit or the AVR/AVC on the
remote control unit to turn on the power
2
Select the front speakers.
Press SPEAKER A or B turn the speaker on.
(Main unit) (Remote control unit)
• ON/STANDBY
When the button is pressed, the power turns on and the
display lights after approximately 1 second.
When pressed again, the power turns off, the standby
mode is set and the display turns off.
Several seconds are required from the time the power
operation switch is set to the “ON” position until sound is
output. This is due to the built-in muting circuit that
prevents noise when the power switch is turned on and off.
(Main unit)
To Next Page
Loading...
Need help?
General
