III
11 REMOTE CONTROL UNIT
l Turn on the power of the different components before operating them
1
Set mode switch 1 to “AUDIO”.
AUDIO.
ICID)
.VIDEO-
Set mode switch 2 to the position for the component to be
operated. (CD, CDFVMD or Tape deck)
3
Operate the audio component.
l For details, refer to the component’s operating instructions.
.x While this remote control is compatible with a wide range of Infrared controlled components, some models of components may not
be operated with this remote control.
1. CD plaver (CD) and CD recorder and MD recorder
(CDFhiD) system buttons
2. Tape deck ITAPE) system buttons
44 : Rewind
3. Tuner system buttons
H.-
Manual search (forward and reverse)
n : stop
b Play
l44, bW : Auto search (cue)
II
: Pause
DISC
: Switch discs
SKIP+
(for CD changers only)
SHIFT
CHANNEL
+. -
TUNING
+. -
BAND
MODE
MEMORY
Fast-forward
stop
Forward play
Reverse play
Switch between decks A and B
Switch preset channel range
Preset channel
up/down
Frequency
up/down
Switch between the AM and FM bands
Switch between auto and mono
Preset memory
NOTE:
l TUNER can be operated when the switch is at “AUDIO” positron
27
To Next Page
Loading...
Need help?
General
