m
LISTENING TO THE RADIO
5-1 Auto preset memory
This unit is equipped with a function for automatically searching
for FM broadcast stations and storing them in the preset memory.
1. Press the POWER button while holding in the MEMORY
button. The unit automatically begins searching for FM
broadcast stations.
POWER
ON/STANDBY
M~
2. When the first FM broadcast station is found, that station is
stored in the preset memory at channel A 1. Subsequent
stations are automatically stored in order at preset channels
A2 to A8, B1 to B8, C1 to C8 and 01 to 08, for a maximum of 32
stations.
5-2 Auto tuning
1.
Set the input function to "TUNER".
Set the slide switch to
"AUDIO".
AUDIO---
~
AVR/AVC VIDEO-
2. Watching the display, press the BAND button to select the
desired band (AM or FM).
TUNNING --
g~
3. Channel A 1 is tuned in after the auto preset memory operation
is completed.
NOTES:
• If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation to tune in the
station, then preset it using the manual "Preset memory"
operation.
• RDS stations are stored in the memory with priority.
3. Press the MODE button to set the auto tuning
4.
Press the TUNING UP or DOWN button.
mode.
TUNNING --
CJ ~_
~ DOWN~
~
"AUTO" appears on the display.
Automatic searching begins, then stops
when a station is tuned in.
If tuning does not stop at the desired station, use to the "Manual tuning" operation.
5-3 Manual tuning
1.
Set the input function to "TUNER".
2. Watching the display, press the BAND button to select the
desired band (AM or FM).
3. Press the MODE button to set the manual tuning mode.
Check that the display's "AUTO" indicator turns.
5-4 Preset memory
1. Use the "Auto tuning" or "Manual tuning" operation to tune in
the station to be preset in the memory.
2. Press the MEMORY button.
M~
18
4.
Press the TUNING UP or DOWN button to tune in the desired
station.
The frequency changes continuously when the button is held
in.
To Next Page
Loading...
Need help?
General
