D E N O N E L E C T R O N I C S ( U S A ) , L L C
1
Specifications and Setup Procedure for Non-DENON Microphone Use for AVR-3805 Auto
Setup and Room EQ Function
Required Microphone Specifications for DENON Auto-Setup and Room EQ
• Element : Electric Condenser Microphone
• Polar Pattern : Omni-directional
• Sensitivity : -40 dBV (0dB = 1V/1Pa)
• Frequency Response : 20-20kHz Flat Response (Ex: BEHRINGER ECM-8000)
Required Microphone Amplifier Specification for DENON Auto-Setup Room EQ
• Gain : 29 dB
• Frequency Response : 10-30kHz Full Flat
Microphone Placement
• Set the microphone using a microphone stand, or other method, at the prime listening
point
• Point the top of the microphone toward the ceiling
• Adjust the height so that the top of microphone to matches the height of your ear when
sitting
Listening
Microphone