z1
The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.
z2
The applicable sound mode includes “DTS Neo:X” and sound modes that have “+Neo:X” in the sound mode name.
z3
A signal for each channel contained in an input signal is output as audio.
z4
Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v
p. 242)
z5 Audio is output from the speakers specified in the “Surround Parameter” – “Speaker Select” settings. (v p. 187)
z6
Audio is output from the speakers specified in the “Audyssey DSX
®
” settings. (v
p. 193)
z7
Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 249)
Upgrade (Auro-3D)
.
z8
This is output if an Auro-3D signal is input and the input signal contains Top Surround.
Contents Connections Playback Settings Tips Appendix
310
Front panel Display Rear panel Remote Index