Name: Denon AVR-X5200W
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

This item can be selected when the Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played back.

This item can be selected when the Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos or DTS is played back.

This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.

During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.

This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v

p. 249)

This item cannot be set when “Dynamic EQ” is set to “On”. (v

p. 191)

This item cannot be set when Audyssey

Setup (Speaker Calibration) has not been performed.

This item cannot be set when “MultEQ

XT32” in the menu is set to “Off”.

p. 190)

This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.

z10

This can be set if the input signal does not contain an Auro-3D signal or if the input Auro-3D signal does not contain Front Height channels.

Contents Connections Playback Settings Tips Appendix

314

Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X5200W

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X5200W and is the answer not in the manual?

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Pre-out connectivity	Yes
Audio output channels	- channels
Power output per channel (1KHz@6 Ohm)	205 W
Power output per channel (20-20KHz@8 Ohm)	140 W
HDMI in	8
Remote (IR) input	1
Composite video in	5
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired & Wireless
Speakers connectivity type	-
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
Product color	Silver
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	730 W