ENGLISH
Getting Started Setup Playback Setting the Timer Other Functions Troubleshooting Specifications
Audio cables
Analog connections (stereo)
(White)
(Red)
Stereo pin-plug cable
Analog connections (subwoofer)
(Black)
Pin-plug cable
Speaker connections
Speaker cable
Signal direction
Audio signal:
Output
Input
Input
Output
Nail, tack, etc.
NOTE
• Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the owner’s manual of the
other components.
• Be sure to connect the left and right channels properly (left with left,
right with right).
• Do not bundle power supply cords together with connection cables.
Doing so can result in humming or noise.
Connections for all compatible audio signal formats are described
in this owner’s manual. Please select the types of connections
suited for the equipment you are connecting.
With some types of connections, certain settings must be made
on the RCD-M37. For details, refer to the instructions for the
respective connection items below.
Select the cables according to the equipment being connected.
Preparations
Cables Used for Connections
Using the AM Loop Antenna
n To use suspended on a wall
Suspend directly on the wall without assembling.
n To use standing alone
Use the procedure below to assemble.
Assembling the AM Loop Antenna
1
Bend in the direction of the arrow.
2
Insert into the hole.
Connections
Connections
To Next Page
Loading...
Need help?
General
