Denon DBT-1713UD User Manual

62
GAudioH
Symptom Cause/Solution Page
HD audio is not
output.
•Set “BD Audio Mode” to “HD Audio Output”.
30
No sound or the
sound is hard to
hear.
•Check the audio connections of connected devices and speakers.
•Is the power connected audio devices turned on?
Is the input selection set to the input to which the unit is
connected?
•Is the audio output properly selected?
9
–
26,57
No sound. •The unit is in reverse play, fast forward, fast reverse, slow forward,
slow reverse or pause mode. Return to the normal playback.
•The HDMI OUT connector is probably connected to a DVI IN
connector of equipment. DVI connection does not support HDCP
and the audio is not output correctly.
•Is the Pure Direct function set to “AV P.Direct”, “Pure Direct 1”
or “Pure direct 2”? Set it to “Off”.
–
8,56
27
Interactive audio is
not output.
•Set “BD Audio mode” to “Mix Audio Output” using the OPTION
setting menu.
30
Multi-channel audio
is not output.
•Is the multi-channel audio selected? Press
AUDIO of the remote
control to switch from audio supported by a disc to multi-channel
audio.
26
GHDMIH
Symptom Cause/Solution Page
Video and audio are
not output via the
HDMI connection.
•Check the connection of the HDMI cable.
•Is the “HDMI” indicator on the display of the unit lit?
•Is the Pure Direct function set to “AV P.Direct”, “Pure Direct 1”
or “Pure Direct 2”? Set it to “Off”.
•Check whether the connected display device or other device
supports HDCP. This unit will not output a video signal unless the
other device supports HDCP. See the owner’s manual of your TV,
AV receiver, etc.
•Check that the setting of the HDMI video resolution supports the
resolution of the connected device. When set to “Auto”, this unit
makes the setting automatically.
•Turn off power of the unit and then turn it back on.
•Turn off power of the connected device and then turn it back on.
•Unplug the HDMI cable and then plug it in again.
•When you connect the unit to an AV receiver, first connect the
unit directly to a television and check the video and audio output. If
output is performed properly, connect the unit to the AV receiver
again and check the AV receiver setting.
7
46
27
56
28
13
–
7
–

Denon DBT-1713UD Specifications

General

3D	Yes
Depth	295 mm
Width	434 mm
Height	108 mm
Weight	4900 g
Device type	Blu-Ray player
Product color	Black
Audio decoders	-
Cables included	AC
AC input voltage	120 V
AC input frequency	60 Hz
Disc types supported	BD, BD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
Dynamic range (1kHz)	100 dB
Playback disc formats	Blu-Ray video, CD audio
Supported video modes	1080p
Card reader integrated	No
USB 2.0 ports quantity	1
Digital audio optical out	0
Analog signal format system	NTSC, PAL
Power consumption (standby)	0.5 W
Power consumption (typical)	20 W
Signal-to-Noise Ratio (SNR)	115 dB
Audio output channels	2.0 channels
Total Harmonic Distortion (THD)	0.0025 %