Denon DCD-100 User Manual

Playing tracks in a specific order
(Program playback)
Up to 25 tracks can be programmed.
1
In the stop mode, press PROGRAM.
“PROG” is displayed on the display.
2
Use 0 – 9 and +10 to select the tracks.
GExampleH
To program tracks 3, 12 to play in that order: Press 3, +10 and 2 one
after the other.
3
Press 1/3.
Playback starts in the programmed order.
0
When RANDOM P is pressed during program playback, the programmed tracks
are played in random order.
0
When REPEAT L is pressed during program playback, the tracks are played
repeatedly in the programmed order.
NOTE
0
The program is cleared when the disc is ejected or the power is turned off.
o
Checking the order of the programmed tracks
In the stop mode, press 9.
The tracks are shown in the programmed order in the display each
time 9 is pressed.
o
To clear the last track programmed
In the stop mode, press CLEAR.
To clear the last track programmed.
The last track programmed is cleared each time the button is pressed.
o
Clearing the all programmed track
In the stop mode, press PROGRAM.
Contents Connections Playback Settings Tips Appendix
24
Front panel Display Rear panel Remote Index

Denon DCD-100 Specifications

General

CD-R playback	Yes
CD-RW playback	No
Playback disc formats	WMA, MP3, CD audio
Frequency range	2 - 20000 Hz
Audio formats supported	AAC, ALAC, DSD, MP3, WMA
Signal-to-Noise Ratio (SNR)	105 dB
Total Harmonic Distortion (THD)	0.004 %
CD changer	-
Device type	HiFi CD player
Product color	Silver
Housing material	Aluminum
Channels quantity	2 channels
Disc playback modes	Random, Repeat all
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	230 V
Power consumption (standby)	0.4 W
Power consumption (typical)	10 W
Remote control type	RC-1215
Audio output - analog	2
Volume control	Rotary
Display type	OLED
Digital audio coaxial out	1

Weight and Dimensions

Depth	305 mm
Width	280 mm
Height	71 mm
Weight	4200 g