Denon DCD-100 User Manual

Inserting the batteries
1
Remove the rear lid in the direction of the arrow and
remove it.
.
2
Insert two batteries correctly into the battery
compartment as indicated.
.
Batteries
3
Put the rear cover back on.
NOTE
0
To prevent damage or leakage of battery fluid:
0
Do not use a new battery together with an old one.
0
Do not use two different types of batteries.
0
Remove the batteries from the remote control unit if it will not be in use for long
periods.
0
If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Operating range of the remote control
unit
Point the remote control unit at the remote sensor when operating it.
.
Approx. 7 m
30°
30°
Contents
Connections Playback Settings Tips Appendix
5
Front panel Display Rear panel Remote Index

Denon DCD-100 Specifications

General

CD-R playback	Yes
CD-RW playback	No
Playback disc formats	WMA, MP3, CD audio
Frequency range	2 - 20000 Hz
Audio formats supported	AAC, ALAC, DSD, MP3, WMA
Signal-to-Noise Ratio (SNR)	105 dB
Total Harmonic Distortion (THD)	0.004 %
CD changer	-
Device type	HiFi CD player
Product color	Silver
Housing material	Aluminum
Channels quantity	2 channels
Disc playback modes	Random, Repeat all
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	230 V
Power consumption (standby)	0.4 W
Power consumption (typical)	10 W
Remote control type	RC-1215
Audio output - analog	2
Volume control	Rotary
Display type	OLED
Digital audio coaxial out	1

Weight and Dimensions

Depth	305 mm
Width	280 mm
Height	71 mm
Weight	4200 g