EasyManuals Logo
Home>Denon>Receiver>IN-Command Series

Denon IN-Command Series User Manual

Denon IN-Command Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Reset
HOME
Reset procedure:
With the power off, press and hold the “INFO
button, “BACK” button, and “POWER” button
simultaneously on the AVR for a few seconds
until the display starts flashing at intervals of
about 1 second.
Resetting the micro is a procedure used to "reboot" the microprocessor to restore its normal operation when it temporarily freezes, locks
up, or behaves erratically. Resetting the microprocessor, erases any saved settings you may have previously programmed into the unit
Issues that can affect the performance of the microprocessor:
A jolt of static electricity
Current surge through an input
Before resetting the microprocessor;
Check all connections carefully
Check for setup errors
Back up your settings. You may also want to write down your preferred settings for easier task of setting up the AVR after reset.
Note: The Web (Browser) Control feature can be used to back up your settings by saving a configuration file on your hard drive. For this
feature, we recommend using one of the following web browsers: Internet Explorer 10 and above, Mozilla Firefox 24 and above, Google
Chrome 29 and above, and Safari 5.x and above.
Note: If you had an installer setup your system, please first contact your installer to see if they can reset and then setup your system again
as there may be specific EQ calibrations (Audyssey) that the installer will need to perform.
Important: Back up the settings before resetting the microprocessor. Most settings are reset to the factory default values after performing
this procedure. This means that all the settings data will be completely lost if it’s not previously saved.
WARRANTY 2
Power/Standby
button
“BACK” button
Initialized
“INFO” button
12
ACCESSORIES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon IN-Command Series and is the answer not in the manual?

Denon IN-Command Series Specifications

General IconGeneral
BrandDenon
ModelIN-Command Series
CategoryReceiver
LanguageEnglish

Related product manuals