Denon RCD-M39 User Manual

14
Presetting FM stations manually
This unit can be preset with a total of 40 FM broadcast stations.
1
Tune in the station you want to
preset.
2
Press ENTER.
The minimum number display “P– –” for
the unregistered preset flashes.
3
Use 0 – 9, +10 or CHANNEL –, +
to select the number to be preset,
then press ENTER.
The reception frequency and reception
mode are preset and the display
switches to the station name input
display.
NOTE
When the registered preset number is
selected, “
*
” is displayed.
To overwrite this preset number, press
ENTER.
4
Input the station name.
Names of up to 8 characters can be input.
•u, i button ..................... Selects the character.
•p button .......................... Moves the cursor to the right.
•CLEAR button ................... Deletes the currently selected
character.
•Characters that can be input.
A ~ Z, 0 ~ 9, ^ ’ ( )
z
+ , - . / = (space)
•If you do not want to input a station name, press ENTER without
inputting anything else.
•If you make a mistake when inputting, perform the procedure
again. Whatever was previously input is overwritten.
5
Press ENTER.
The characters you have input are entered.
•To give names to other stations, repeat steps 1 to 5.
Listening to preset stations
Use 0 – 9, +10 or CHANNEL –, + to
select the preset number.
Listening to FM broadcasts
Setting the preset channels and changing
the received frequency on the main unit
8/–, +/9 on the main unit can be used both for switching the
preset channel and for tuning.
Before operating them, switch the main unit to the “preset mode” or
“tuning mode” using the procedure below.
1
Press SETUP.
2
Use ui to select “TUNER
SETUP”, then press ENTER or
p.
3
Use ui to select “MODE
SELECT”, then press ENTER or
p.
4
Use ui to select “PRESET
MODE” or “TUNING MODE”,
then press ENTER.
PRESET MODE
Press
8/–, +/9 on the main unit to switch
preset channels.
•This is the same operation as CHANNEL –, +
on the remote control unit.
TUNING MODE
Press
8/–, +/9 on the main unit to
change the received frequency.
•This is the same operation as TUNE–, + on the
remote control unit.

Denon RCD-M39 Specifications

General

Brand	Denon
Model	RCD-M39
Category	Car Receiver
Language	English