Technical Information
D25500 D25600
Power input 120V~ 1050W 1150W
220V~ 1050W 1150W
Impact energy (J) 1 - 9 1 - 10
Maximum drilling range in concrete:
- solid bits mm 12 - 40 12 - 45
- core bits mm 40 - 90 40 - 100
Optimum drilling range in concrete:
- solid bits mm 18 - 30 20 - 38
Chisel positions 8 8
Tool holder SDS-max
®
SDS-max
®
Weight kg 6.5 6.6
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Denotes risk of electric shock.
EC-Declaration of conformity
D25500/D25600
DeWALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014-1, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DeWALT at the
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
D25500 D25600
L
pA
(sound pressure) dB(A)* 95 95
L
WA
(acoustic power) dB(A) 103.5 103.5
* at the operator’s ear
Take appropriate measures for the protection
of hearing.
Weighted root mean square acceleration value accord-
ing to EN 50144:
D25500 D25600
9.7 m/s
2
9.8 m/s
2
Director Engineering and Product Development
Horst Großmann
DeWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
DEMOLITION HAMMER D25500/25600
ENGLISH
4
To Next Page
Loading...
Need help?
General
