DeWalt D27111 Manual

28
ENGLISH
Congratulations!
You have chosen a D E WALT tool. Years of experience, thorough product
development and innovation make D E WALT one of the most reliable
partners for professional power tool users.
Technical data
D27111 D27112 D27112-LX
Voltage V 230 230 115
Power input W 1,500 1,600 1,600
Power output W 1,100 933 869
Max. blade speed min
-1
2,950 3,300 3,300
Blade diameter mm 305 305 305
Blade bore mm 30 30 30
Blade body thickness mm 1.8 1.8 1.8
Riving knife thickness mm 2.0 2 2
Riving knife hardness 43 ± 5 43 ± 5 43 ± 5
Blade stopping time s < 10.0 < 10.0 < 10.0
Weight kg 26.5 23 23
Cutting capacities
Mitre saw mode
Mitre (max. positions) left 50° 50° 50°
right 60° 60° 60°
Bevel (max. positions) left 48° 48° 48°
right 0° 0° 0°
Max. width of cut 90° at
max. height 90 mm mm 220 285 285
Max. width of cut at 45° mitre at
max. height 90 mm mm 155 201 201
Max. width of cut at 45° bevel at
max. height 50 mm mm 220 285 285
Saw bench mode
Max. depth of cut mm 0-51
0-51 0-51
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
D27111 /D27112
D
E WALT declares that these Power Tools have been designed in
compliance with: 98/37/EC, 89/336/EEC, 73/23/EEC, EN 61029-1,
EN 61029-2-11, EN 55014, EN 55014-2, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
E WALT at the address below or
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 98/37/EC,
measured according to EN 61029-2-11:
D27111 D27112 D27112-LX
L
pA
(sound pressure) dB(A)* 98 102 102
L
WA
(acoustic power) dB(A) 111 90.7 90.7
* at the operator's ear
Take appropriate measures for the protection of hearing.
Weighted root mean square acceleration value according to
EN 61029-2-11:
D27111 D27112 D27112-LX
0.8 m/s
2
1.2 m/s
2
1.2 m/s
2
TÜV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln
Germany
Cert. No.
D27111 BM60015406
D27112 R60015405
Director Engineering and Product Development
Horst Grossmann
D E WALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
06/2007
TABLE TOP MITRE SAW
D27111 /D27112

DeWalt D27111 Specifications

General

Input power	- W
Power source	AC
Blade bore	30 mm
Blade diameter	305 mm
Saw blade included	Yes
Idle speed (max)	3000 RPM
Sound power level	107 dB
Miter setting (left)	50 °
Sound pressure level	94.5 dB
Miter setting (right)	60 °
Cutting depth (max)	51 mm

Weight and Dimensions

Depth	580 mm
Width	800 mm
Height	710 mm
Weight	26500 g