DeWalt D27111 User Manual

7
ENGLISH
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical Data
D27111 D27112 D27112-LX
Voltage V 230 230 115
Type 1 1 1
Power input W 1,500 1,600 1,600
Power output W 1,100 933 869
Max. blade speed min
-1
2,950 3,300 3,300
Blade diameter mm 305 305 305
Blade bore mm 30 30 30
Blade body thickness mm 1.8 1.8 1.8
Riving knife thickness mm 2 2 2
Riving knife hardness 43 ± 5 43 ± 5 43 ± 5
Blade stopping time s < 10.0 < 10.0 < 10.0
Weight kg 26.5 24 24
Cutting capacities
Mitre saw mode
Mitre (max. positions) left 50° 50° 50°
right 60° 60° 60°
Bevel (max. positions) left 48° 48° 48°
right 0° 0° 0°
Max. width of cut 90° at
max. height 90 mm mm 220 285 285
Max. width of cut at 45° mitre at
max. height 90 mm mm 155 201 201
Max. width of cut at 45° bevel at
max. height 50 mm mm 220 285 285
Saw bench mode
Max. depth of cut mm 0-51 0-51 0-51
L
PA
(sound pressure) dB(A) 95.0 97.0 97.0
K
PA
(sound pressure uncertainty K) dB(A) 3.1 2.9 2.9
L
WA
(sound power) dB(A) 107.0 109.0 109.0
K
WA
(sound power uncertainty K) dB(A) 3.0 3.1 3.0
Vibration total values (triax vector sum) determined according to
EN 61029-1, EN 61029-2-11:
Vibration emission value a
h
a
h
= m/s² 1.3 1.3 1.3
Uncertainty K = m/s² 1.5 1.5 1.5
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.32 Ω at the
interface point (power service box) of user’s supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
D27111 /D27112
DEWALT declares that these products described under “technical data” are
in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-11.
These products also comply with Directive 2004/108/EC. For more
information, please contact DEWALT at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of DEWALT.
Horst Grossmann
Vice President Engineering and Product Development
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
01.01.2010
TABLE TOP MITRE SAW
D27111 /D27112

DeWalt D27111 Specifications

General

Input power	- W
Power source	AC
Blade bore	30 mm
Blade diameter	305 mm
Saw blade included	Yes
Idle speed (max)	3000 RPM
Sound power level	107 dB
Miter setting (left)	50 °
Sound pressure level	94.5 dB
Miter setting (right)	60 °
Cutting depth (max)	51 mm

Weight and Dimensions

Depth	580 mm
Width	800 mm
Height	710 mm
Weight	26500 g