DeWalt D27112 User Manual

16
ENGLISH
• Avoid using oil or grease as this can cause clogging with sawdust and
chips and create problems.
• Clean the parts subject to accumulation of sawdust and chips
periodically with a dry brush.
Optional Accessories
WARNING: Since accessories, other than those offered by
D
EWALT, have not been tested with this product, use of such
accessories with this tool could be hazardous. To reduce the
risk of injury, only D
EWALT, recommended accessories should
be used with this product.
Clamping the workpiece (fig. A3)
• The action of the blade is sufficient to hold the material firmly against the
fence.
• If the material has a tendency to lift or come forward from the fence,
preferably use the optional material clamp (27).
Support for long pieces (fig. A4)
• Always support long pieces.
• For best results, use the extension work support (28) to extend the table
width of your saw (available from your dealer as an option). Support long
workpieces using any convenient means such as saw-horses or similar
devices to keep the ends from dropping.
Dust Collection Port (fig. A5, V)
WARNING! Whenever possible, connect a dust extraction
device designed in accordance with the relevant regulations
regarding dust emission.
• The D27111 will accept the optional dust collection port. For installation,
refer to the dust collection port instructions when purchased.
• The D27112 will accept and is supplied with the dust collection port.
Connect a dust collection device designed in accordance with the relevant
regulations. The air velocity of externally connected systems shall be 20
m/s ±2 m/s. Velocity to be measured in the connection tube at the point of
connection, with the tool connected but not running.
Consult your dealer for further information on the appropriate accessories.
Protecting the Environment
Separate collection. This product must not be disposed of with
normal household waste.
Should you find one day that your DEWALT product needs replacement, or
if it is of no further use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of electrical products
from the household, at municipal waste sites or by the retailer when you
purchase a new product.
DEWALT provides a facility for the collection and recycling of DEWALT
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local DEWALT office at the address indicated in this manual.
Alternatively, a list of authorised DEWALT repair agents and full details
of our after-sales service and contacts are available on the Internet at:
www.2helpU.com.
GUARANTEE
DEWALT is confident of the quality of its products and offers an
outstanding guarantee for professional users of the product.
This guarantee statement is in addition to and in no way
prejudices your contractual rights as a professional user or
your statutory rights as a private non-professional user. The
guarantee is valid within the territories of the Member States of
the European Union and the European Free Trade Area.
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D
EWALT tool, simply return it within 30 days, complete with all
original components, as purchased, to the point of purchase,
for a full refund or exchange. The product must have been
subject to fair wear and tear and proof of purchase must be
produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your DEWALT tool, in
the 12 months following purchase, you are entitled to one
service free of charge. It will be undertaken free of charge at
an authorised DEWALT repair agent. Proof of purchase must
be produced. Includes labour. Excludes accessories and spare
parts unless failed under warranty.
• ONE YEAR FULL WARRANTY •
If your D
EWALT product becomes defective due to faulty
materials or workmanship within 12 months from the date of
purchase, DEWALT guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised
persons;
• Proof of purchase is produced.
• The product is returned complete with all original
components
If you wish to make a claim, contact your seller or check the
location of your nearest authorised DEWALT repair agent in
the DEWALT catalogue or contact your DEWALT office at the
address indicated in this manual. A list of authorised DEWALT
repair agents and full details of our after-sales service is
available on the Internet at: www.2helpU.com

DeWalt D27112 Specifications

General

Input power	- W
Power source	AC
Blade bore	30 mm
Blade diameter	305 mm
Saw blade included	Yes
Idle speed (max)	3650 RPM
Sound power level	109 dB
Miter setting (left)	50 °
Sound pressure level	97 dB
Miter setting (right)	60 °
Cutting depth (max)	51 mm

Weight and Dimensions

Depth	580 mm
Width	980 mm
Height	710 mm
Weight	23000 g