27
ENGLISH
TABLE TOP MITRE SAW
D27113
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical Data
D27113 D27113-LX
Voltage V 230 115
Type 1 1
Power input W 1,600 1,600
Power output W 933 869
Max. blade speed min
-1
3,300 3,300
Blade diameter mm 305 305
Blade bore mm 30 30
Blade body thickness mm 1.8 1.8
Riving knife thickness mm 2 2
Riving knife hardness HRC 43 ± 5 43 ± 5
Blade stopping time s < 10.0 < 10.0
Weight kg 20 20
CUTTING CAPACITIES
Mitre saw mode
Mitre (max. positions) left 50° 50°
right 50° 50°
Bevel (max. positions) left 48°* 48°*
right 0° 0°
Max. width of cut 90° at
max. height 85 mm mm 160 160
Max. width of cut at 45° mitre at
max. height 85 mm mm 110 110
Max. width of cut at 45° bevel at
max. height 55 mm mm 160 160
*Factory setting is 45°
Saw bench mode
Max. depth of cut mm 0–51 0–51
L
PA
(sound pressure) dB(A) 97 97
K
PA
(sound pressure uncertainty K) dB(A) 2.9 2.9
L
WA
(sound power) dB(A) 109 109
K
WA
(sound power uncertainty K) dB(A) 3.1 3.1
Vibration total values (triax vector sum) determined according to
EN 61029-1, EN 61029-2-11:
Vibration emission value a
h
a
h
= m/s² 1.3 1.3
Uncertainty K = m/s² 1.5 1.5
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.32 at the
interface point (power service box) of user’s supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
D27113
D
EWALT declares that these products described under Technical Data are
in compliance with: 2006/42/EC, EN 61029-1, EN 61029-2-11.
These products also comply with Directive 2004/108/EC and 2011/65/EU.
For more information, please contact D
EWALT at the following address or
refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
EWALT.
Horst Grossmann
Vice President Engineering and Product Development
D
EWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
10.01.2011
Safety Instructions
WARNING! When using electric tools basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and personal injury including the following.
Read all these instructions before attempting to operate this product and
save these instructions.
Ташев-Галвинг ООД
www.tashev-galving.com
To Next Page
Loading...
Need help?
General
