DeWalt DCF891H2T User Manual

ENGLISH
3
EC‑Declaration of Conformity
Machinery Directive
o
18V Cordless Impact Wrench
DCF891, DCF892
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
29.08.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
18V Cordless Impact Wrench
DCF891, DCF892
DeWALT declares that these products described under
“technical data” are in compliance with:
EN62841‑1:2015, EN62841‑2‑2:2014
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (asamended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(asamended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact DeWALT at the following
address or refer to the back of the manual.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total workingperiod.
DCF891 DCF892
Voltage V
DC
18 18
Type
1 1
Battery type
Li‑Ion Li‑Ion
Power output
W 760 760
No load speed min
‑1
0–2000 0–2000
Impact rate min
‑1
0–3250 0–3250
Max tightening torque
Precision Wrench™ mode
Low Mode
Medium mode
High mode
Nm
Nm
Nm
Nm
812
136
406
812
812
136
406
812
Max breakaway torque Nm 1084 1084
Tool holder 1/2" (13 mm) 1/2" (13 mm)
Weight (without battery pack) kg
1.67 1.67
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑2:
L
PA
(emission sound
pressure level)
dB(A) 91 91
L
WA
(sound power level)
dB(A) 102 102
K (uncertainty for the
given sound level)
dB(A) 3 3
Vibration emission value
a
h
=
m/s
2
10 10
Uncertainty K = m/s
2
1.7 1.7
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
18V CORDLESS IMPACT WRENCH
DCF891, DCF892

DeWalt DCF891H2T Specifications

General

Brand	DeWalt
Model	DCF891H2T
Category	Impact Driver
Language	English